軍事模型，靜態軍事模型有紙模，塑料模型，木帆船模型，金屬模型，樹脂模型，場景模型。
Military model, Shenzhen static military model includes paper model, plastic model, wooden sailboat model, metal model, resin model and scene model.
動態的主要就是遙控了。
The main dynamic is remote control.
靜態中，紙?？雌饋硐裥『⑼娴模鋵嵤禽^高境界，因為紙比較脆弱，卻能夠模仿所有變化效果。
In the static state, the paper mold looks like a child playing, but it is actually a higher state, because the paper is relatively fragile, but it can imitate all the change effects.
木制航海模型其次，考驗考證、耐心、雕工、打磨和上色技法。
Secondly, wooden navigation models test the techniques of textual research, patience, carving, polishing and coloring.
塑料模型難度一般，按圖施工，效果好與不好的差距在于上色，上色的差距在于分色，漬洗和舊化。不了解用色和做舊的，永遠就是在做玩具。
The difficulty of plastic model is general. It is constructed according to the drawing. The difference between good and bad results lies in coloring, and the difference between coloring lies in color separation, pickling and aging. If you don't know how to use color and make old ones, you are always making toys.
軍事模型
Military model
動態的遙控成本就太高了，變態者也很多，目前有毛子做了噴氣式蘇27，我這輩子死也不會玩遙控。只玩玩塑料模型，水線，兵人，木船模型和場景模型。
The cost of dynamic remote control is too high, and there are many perverts. At present, maozi has made jet Su 27. I won't play remote control in my life. Only play with plastic models, waterlines, soldiers, wooden boat models and scene models.
組裝塑料模型步驟
To assemble a plastic model
一是清點零件，用泡沫筆標號，然后從板框上剪下來，全部精細修邊，用砂紙打磨毛邊、連接口、合模線、用補土填注塑孔。
One is to count parts, use foam pen labels, then cut them from the frame, trim all edges carefully, use sandpaper to polish the burrs, connect joints, mold lines, and fill holes with plastic fill.
二是假組合，看下組合度。結合度好的材料，車體，機體，履帶等都是可以直接假組的，結合度不好的地可以用遮蓋膠帶先固定一下，假組的目的是看哪里有縫隙，哪里有凹凸，以便調整。
The second is false combination. Look at the combination degree. Materials with good bonding degree, car body, body, track, etc. can be directly combined. Areas with poor bonding degree can be fixed with masking tape first. The purpose of the false group is to see where there are gaps and bumps for adjustment.
三是按照圖紙粘接主要部分。用滴縫膠，一定要避免膠水過多滲出結合面。
Third, the main parts shall be bonded according to the drawings. When using drip joint glue, be sure to avoid too much glue seeping out of the joint surface.
四是上金屬改造件。
Fourth, upper metal transformation parts.
五是分部上色，比如坦克履帶和車身分開，飛機內部和外部，艦艇分木甲板和金屬船身。
The fifth is to color the parts. For example, the tank tracks are separated from the body, the inside and outside of the aircraft, and the ship is divided into wooden deck and metal hull.
軍事模型上色基本步驟有：
The basic steps of military model coloring are as follows:
分水補土打底，細噴描黑線暗部，輕粗噴大面積部分，上高光。對于有迷彩的，分硬迷彩和軟迷彩，所謂硬迷彩就是色塊邊緣是實線，這個要用到遮蓋紙。所謂軟迷彩就是色塊邊緣是自然過渡的，直接手持噴槍分色。
Divide the water, fill the soil and make the bottom, fine spray the dark part of the black line, light and coarse spray the large part, and highlight it. For those with camouflage, it is divided into hard camouflage and soft camouflage. The so-called hard camouflage is that the edge of the color block is a solid line, which requires covering paper. The so-called soft camouflage is that the edge of the color block is a natural transition, and the color is separated directly with a hand-held spray gun.
六是上帖紙，軟化貼紙。
Sixth, apply stickers and soften stickers.
七是整體調整。
Seventh, overall adjustment.
八是舊化，有的人在舊化以前還要做鏡像。
Eighth, aging. Some people have to mirror before aging.
軍事模型DIY基本舊化方法有：
The basic aging methods of military model DIY include:
1.鹽蝕，用來做沙漠涂裝風化效果。
1. Salt corrosion, used for desert coating weathering effect.
2.干掃，用來處理棱角掉漆，把手油化。
2. Dry sweeping is used to deal with edges and corners, paint falling off and handle oiling.
3.流銹和油污，用來處理引擎，排煙管，水線船。
3. Rust and oil stain are used to treat engines, smoke exhaust pipes and waterline ships.
4.點描，用來處理彈孔，擦傷，泥土飛濺污漬。
4. Point tracing is used to deal with bullet holes, scratches, soil splashes and stains.
The content of this article is provided to you by a large aerospace model. We focus on customer needs, continuous development and provide more services for customers. For details, please refer to our website http://135130.cn
